Asphalt Paving
New asphalt paving for drive lanes, access roads, and paved areas, with proper base prep and grading for long-term performance.
Serving Las Vegas, Nevada & surrounding areas
Las Vegas surface protection
Protect your pavers and asphalt from sun, staining, and surface wear with professional cleaning, prep, and sealcoating. Get a clear scope, straightforward scheduling, and a finish that looks right for your property.
Prep determines performance
If you searched for paver sealing Las Vegas, you are probably dealing with fading, stubborn stains, dusting sand in the joints, or a surface that just looks tired. In Southern Nevada, intense UV and heat punish unprotected surfaces, and wind-blown grit acts like sandpaper on traffic areas. A good seal is as much about prep as it is about the product.
Las Vegas Sealcoating approaches paver and pavement sealing like a maintenance job, not a cosmetic shortcut. We start by checking the surface condition, drainage, and any areas where water sits. Then we clean thoroughly, treat staining where needed, re-sand joints for pavers when appropriate, and apply the right sealer for the look you want—natural finish or enhanced color, depending on the surface and product. For asphalt sealing Las Vegas projects, we focus on cleaning, edge work, and even coverage so the coating bonds and cures consistently.
The goal is simple: a sealed surface that looks clean, stays easier to maintain, and holds up better against sun, oil spots, and day-to-day traffic.
Complete pavement care
New asphalt paving for drive lanes, access roads, and paved areas, with proper base prep and grading for long-term performance.
Fresh layout and restriping for stalls, arrows, and markings to improve traffic flow and keep your lot compliant and easy to navigate.
Residential driveway sealcoating that restores a clean black finish and adds protection against weathering and surface wear.
Ongoing pavement maintenance for commercial properties, including planning the right schedule for sealing, repairs, and striping touch-ups.
Hot or cold-applied crack filling to slow water intrusion and reduce spreading damage in asphalt pavements and drive lanes.
Patching and surface repairs for potholes, failed areas, and broken edges to restore safety and extend pavement life.
Careful work at every edge
We remove dirt, grime, and loose material so the sealer bonds instead of sitting on top of contamination.
Detail work around borders, drains, and transitions keeps the job looking sharp and avoids sloppy overlap.
We talk through the finish you want and the surface use so the product choice matches the conditions.
Sealing helps reduce absorption from oil, pool chemicals, and common outdoor spills so cleanup is easier.
We flag cracking, low spots, or failing areas we see during prep so you can plan asphalt maintenance in Las Vegas before it becomes a bigger repair.
Local and organized
Las Vegas Sealcoating is a local contractor focused on sealcoating Las Vegas properties with practical, jobsite-tested methods. We work with homeowners, HOAs, and commercial property managers who want clear communication and surfaces that look professional.
Our shop is based at 3170 Polaris Ave, Suite 5, Las Vegas, NV 89102, which keeps us close to the neighborhoods and commercial corridors where pavement takes a beating. Whether you are sealing decorative pavers or scheduling Las Vegas seal coating for asphalt, we keep the process simple: evaluate the surface, explain the prep, outline what will be protected, and set expectations for cure time and access.
If you are comparing a sealcoating company Las Vegas offers, ask what prep is included and what happens if the surface needs repairs first. We are happy to walk the site and give you a written scope so you can make a clean decision.
Project pricing
Paver sealing in Las Vegas typically ranges from about $0.75 to $2.50 per square foot, with many residential projects landing in the low thousands depending on size and prep. Smaller patios and walkways often price out at a minimum service charge, while larger driveways and pool decks usually come in at a lower per-square-foot rate.
Your final price depends on square footage, stain treatment needs, joint sand condition, required cleaning, surface repairs, and the sealer type—natural versus enhanced. We confirm the exact scope and cost after an on-site evaluation of the surface condition and access.
Inspection to cure
A disciplined sequence helps the sealer bond evenly and gives you clear guidance on access and cure timing.
Book Your Free InspectionWe look at surface condition, drainage, traffic patterns, and any problem spots—oil staining, low areas, failing edges—to set the right scope.
We remove dirt and buildup, treat staining as needed, protect adjacent surfaces, and address areas that would interfere with adhesion.
Where appropriate, we refresh joint sand so pavers lock in better and the surface looks uniform before sealing.
We apply an even coat with clean cut-ins, then review access and cure timing so the finish sets up properly.
If your pavers are fading or your asphalt is graying out, get a written scope that spells out prep, product choice, and what the finished surface will look like.
Call for a Free EstimateLocal coverage
We provide paver sealing and asphalt sealcoating across Las Vegas, with a focus on areas where sun exposure, traffic, and wind-blown grit quickly age unprotected surfaces.
Book Your Free InspectionCustomer experience
“Our pavers had faded and were holding stains near the garage. The prep work was the difference. After sealing, the color looked even and cleanup has been much easier.”
“They explained cure time, blocked off the right areas, and the finish came out consistent with no messy edges. The whole job felt organized.”
“We manage a small commercial lot and needed sealcoating without a lot of back and forth. The scope was clear and the scheduling was straightforward.”
Answers before scheduling
Yes, we handle paver sealing and asphalt sealcoating, and we choose products and prep steps based on the surface type. The cleaning method, crack treatment, and application approach differ between pavers and asphalt, so we scope them separately even when they are on the same property.
If the surface has cracking, raveling, low spots that hold water, or failing edges, repairs usually come before sealing. During the site visit we point out what is cosmetic versus what affects performance, so you are not sealing over problems that will keep spreading.
Most sealed surfaces need time to cure before foot or vehicle traffic returns. Cure time depends on product type, temperature, and whether the surface is in direct sun or shaded, and we give access guidance for your specific layout before we start.
Yes, we can discuss a natural look or an enhanced finish based on the current paver color and the result you want. We will also explain how gloss level and darkening can vary by paver type and surface porosity.
Yes, we work with commercial sites and HOAs for Las Vegas sealcoating and pavement maintenance. We can plan the work to keep access open where possible and outline any phasing needed for entrances, parking, and pedestrian routes.
The fastest way is to share what areas you want sealed—driveway, patio, walkways, pool deck, or asphalt lanes—and any known issues like stains, sprinkler overspray, or cracking. We will confirm measurements, surface condition, and prep needs on-site and then provide a written scope.
Plan your project
Tell us what you want sealed and what issues you are seeing. We will recommend the right prep and sealer, then provide a written scope with realistic timing for access and cure.